Software Overview
ALPHA3D USER MANUAL
| 2019-06
P a g e | 57
After both static & kinematic alignment of IMU finished, click
START
to turn on laser scanner
and a prompt box will be appeared which shown below. Finally, click
YES
to start data capture.
After click
START
, a gif will be appeared which represent scanner is start work and the button
will change like below:
During data capture process, if vehicle faces red light or traffic jam need to stop, the
PAUSE
button can be chosen to click which can stop data recording (scanner still work); When it can
be captured normally, click
CONTINUE
to keep capture.
