Software Overview
ALPHA3D USER MANUAL
| 2019-06
P a g e | 48
◼
START & STOP
: It’s used to control laser scanner. Below figures show start scanning and
stop scanning respectively.
◼
SHUT DOWN SYSTEM
: It’s used to turn off scanner, and after 10 seconds, the computer
will close automatically, and the internal system is out of power.
◼
Parameter Setting
: Click below icon to set laser scanner parameters and camera
parameters. If the parameter can be set, the color is dark grey, and the icon can be clicked.
If the parameter cannot be set, the color is grey, and the icon cannot be clicked.
CAMERA
: It’s used to set parameters of camera includes trigger time interval and camera
exposure mode. Once the parameters are set, click
APPLY
to use new parameters. Click
SAVE
will save these parameters although restart device or software. Click
CANCLE
will exit this
window without any changes.
