Chauvin Arnoux Metrix MTX 3292B, Руководство пользователя

Страница: 26 / 55

26
5.2.5. Procedure
1. Press function A, then select the coupling according to your measurements: AC,
DC, AC+DC (AC+DC is default)
2. Connect the black lead to the COM terminal, the red lead to A, and the probe
tips in series between the source and the load as shown below:
3. Read the measurement indicated on the main display unit. Look up the graph of
the trend values >1min28s if it is activated. Look up the secondary measurements if they
are activated (activated by Meas…

MEAS+).
4. It is possible to display the specifications of the range for metrology or a
RELative measurement.
5. Surveillance of voltage SURV or Recording MEM of data internal to the
multimeter
"OL" is displayed if the current available I >20A.
6. View the waveform of a current in the 10 Hz
– 600 Hz band
Current measurement with clamp 5.3.
5.3.1. Connecting the multimeter
Current clamp with current output connected to the multimeter
Current clamp with voltage output connected to the multimeter