manualshive.com logo in svg

Chauvin Arnoux C.A 6160, Руководство пользователя

Поделиться
Скачать
Chauvin Arnoux C.A 6160 Скачать руководство пользователя страница 4

4

Main plug

Dangerous voltage is present on the FUSES - switch off the
instrument and disconnect all test cables and mains cord before
replacing the fuses or opening the instrument.

1.2

WARRANTY

Unless stated differently, our instruments are guaranteed against any manufacturing or material defect. They do not bear the
specification known as the safety specification. Our guarantee, which may not under any circumstances exceed the amount of the
invoiced price, is for the repair of our faulty equipment only, carriage paid to our workshops. It is applicable for normal use of our
instruments and does not apply to any damage or destruction caused, notably by error in mounting, mechanical accident, faulty
maintenance, defective use, overload or excess voltage.

Our responsibility is strictly limited to the pure and simple replacement of the faulty parts of our equipment; the buyer expressly
renounces any attempt to find us responsible for damages or losses caused directly or indirectly.

Our guarantee is applicable for twelve (12) months after the date at which the equipment is made available. The repair,
modification or replacement of a part during the guarantee period will not result in this guarantee being extended.

1.3

LIST OF MEASUREMENTS CARRIED OUT BY THE INSTRUMENT

■

Withstanding programmed voltage - time sequence test

■

Withstanding voltage test

■

High voltage burn-out test

■

Continuity test

■

Voltage drop test

■

Insulation resistance test

■

Leakage current tests (leakage, substitute, touch)

■

Functional tests (power, voltage, current, cos 

ϕ

, frequency)

■

Discharge time measurement

1.4

LIST OF APPLICABLE STANDARDS

C.A APPLIANCE MULTITESTER is designed in accordance with the following standards:

■

EN 61010-1 ............. safety

■

EN 61326 ................ electromagnetic compatibility

Measurements in compliance with:

■

IEC 60204-1 ............ Electrical equipment of machines

■

IEC 60335-1 ............ Household and similar electrical appliances

■

IEC 60439-1 ............ Switch-gear and control-gear assemblies

■

IEC 60598-1 ............ Luminaries

■

IEC 60745 ............... Hand-held motor-operated tools

■

IEC 60755 ............... Residual current operated protect. devices

■

IEC 60950 ............... Safety of information technology equipment

■

IEC 61010-1 ............ Safety requirements for electrical equipment

■

IEC 61029 ............... Transportable motor-operated tools

■

IEC 61558-1 ............ Transformers and power supply units

■

EN 60065 ................ Audio, video, and similar electronic apparatus

■

VDE 701 T1 ............. Repair and modification inspections

■

VDE 702 T1 ............. Repeat tests of electrical appliances

The APPLIANCE MULTITESTER instrument supply upper standards up to 16A according to its maximum power capability.

Содержание C.A 6160
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды