Chauvin Arnoux C.A 6160, Руководство пользователя

Страница: 32 / 55

32
5.3. RECALLING OF STORED RESULTS
The results can be recalled only before the measurement is performed or after the result is saved.
STEP 1. Press MEM key in order to reach memory menu for recalling results (see fig. below).
Fig. 50. Memory heading for recalling from memory
STEP 2. Select device using
↑
and
↓
keys.
■
If for some reason the device has to be cleared press ClrDev key, (“press ClrDev to confirm” message will be displayed
to prevent clearing by mistake). Press ClrDev key to confirm or Exit to cancel clearing procedure.
STEP 3. Press MEM key to recall saved results under chosen device.
Fig. 51. Recalled result under device 001
STEP 4. Select result you are looking for by using
↑
and
↓
keys.
■
To clear memory location press ClrMem key.
STEP 5. Press Exit key to exit menu.
5.4. RS 232 COMMUNICATION
In order to transfer stored data to PC, RS 232 communication feature must be used.
9 p in m ale con ne ctor-
to
A P P LIA NC E M U LTITE ST E R
9 pin fe m a le co nn ecto r-
to seria l po rt o n P C
2
2
3
3
5
5
fro n t vie w fro n t vie w
Fig. 52. RS 232 communication cable
NOTE !
Use original RS 232 communication cable or connect only pins on serial DB9 connectors according to Fig. 52 to avoid
damages (pin 2, 3, 5).