Chauvin Arnoux C.A 6116, Руководство пользователя

Страница: 87 / 96

87
If charging proceeds normally, let the device perform a full charge.
If, at the end of some time, the “defective battery” message appears once again, the battery must be replaced.
8.5.6. Enf of bAttERy lIfE
The internal resistance of a battery at the end of its life is high. The result is an abnormally short charging time.
After a full charge, the device indicates “charging over”, but as soon as the charger is disconnected, the display unit loses its
contrast and goes off, meaning that the battery no longer holds a charge.
Before you replace the battery, we recommend referring to § 8.5.5 and performing the procedure indicated.
8.6. EnvIRonMEntAl ConDItIons
Indoor and outdoor use.
Operating range
0 to 55°C and 10% to 85% RH
Specified operating range
13
0 to 35°C and 10% to 75% RH
Range for recharging the battery 10 to 35°C
Range in storage (without battery) -40°C to +70°C and 10% to 90% RH
Altitude <2,000m
Pollution degree 2
13: This range corresponds to the range of the operating uncertainty defined by standard IEC-61557. When the device is used
outside this range, it is necessary to add 1.5%/10°C and 1.5% between 75 and 90% RH to the operating uncertainty.
8.7. MECHAnICAl CHARACtERIstICs
Dimensions (L x D x H) 280 x 190 x 128 mm
Weight
approximately 2.4 kg
Protection class IP 53 per IEC-60 529 if the cover of the USB port is closed, IP 51 if it is open.
IK 04 per IEC-50102
Free fall test Per IEC-61010-1
8.8. ConfoRMIty to IntERnAtIonAl stAnDARDs
The device is in conformity with IEC-61010-1 and IEC 61010-2-030, 600V, CAT III or 300V CAT IV.
Assigned characteristics: measurement category III, 600V with respect to earth (or 300V in CAT IV under shelter), 550V in dif-
ferential between the terminals, and 300V, CAT II on the charger input.
The device is in conformity with IEC-61557 parts 1, 2, 3, 4, 5, 6, 7 and 10.
8.9. ElECtRoMAGnEtIC CoMPAtIbIlIty (EMC)
The device is in conformity with standard IEC-61326-1.