Chauvin Arnoux C.A 6116, Руководство пользователя

Страница: 63 / 96

63
6. MEMoRy fUnCtIon
6.1. oRGAnIZAtIon of tHE MEMoRy AnD nAvIGAtIon
The device has 4000 memory locations to record measurements. They are organized in a tree on three levels, as follows:
SITE 1
ROOM 1
OBJECT 1

OBJECT 2

ROOM 2
OBJECT 1

SITE 2
ROOM 1
...
Navigation in the tree is done using the directional keypad. The titles of the SITES, ROOMS, and OBJECTS can be parameter-
ized by the user.
If a SITE or ROOM is preceded by the sign, it means that this level has sub-levels that can be expanded using the key or
the OK key. The sign is then replaced by the sign.
To compress the tree (change from the sign to the sign), use the or OK key.
Measurements are always recorded on an OBJECT. In the OBJECT, measurements are classified by TYPE OF TEST (continuity,
insulation, loop, etc.). Each OBJECT can contain up to nine TESTS belonging to the same TYPE OF TEST. Each TEST corresponds
to one measurement.
To see the tests contained in an OBJECT, go to the OBJECT and press the OK key.
A status symbol displayed to the right of the OBJECTS, of the TYPES OF TEST, and of the TEST indicates:

that the OBJECT has not yet been tested,

that all TESTS of the OBJECT are OK,

that at least one TEST of the OBJECT is not OK.
6.2. EntERInG tHE stoRAGE fUnCtIon
When a measurement is over, the device proposes recording it by displaying the recording icon (arrow pointing in) at bottom left
of the measurement results:
5 %
The percentage indicates the level of occupancy of the memory.
If you want to record the measurement you have just made, press the key alongside the record icon.
Remark: For a measurement to be «recordable», the TEST button must have been pressed. It is not possible to record voltage
measurements alone.
The device displays the following message:
Please, wait...