English
46 - 138
The measured current is displayed on screen.
3.1.8
Non-Contact Voltage NCV
1.
Set the switch to
;
2.
Move the C.A 5231 (NCV detection zone) close to the
potentially live conductor(s) (presence of phase);
3.
If a network voltage of 230V is present (Europe model),
the back-lighting lights red; otherwise, it remains off.
3.2
FUNCTIONS OF THE KEYS
The functions of the
,
,
,
,
and
keys
can be accessed by successive short or long presses. Each
press is confirmed by an audible signal.
3.2.1
The
key
This key is used to select the type of measurement and the
display mode to deactivate the automatic switching off of the
device, at start-up, in combination with the switch. A long press
during start-up, while turning the
switch to any position,
deactivates automatic switching off. The
symbol is not
displayed. As default, automatic switching off is activated and
the
symbol is displayed.
Remark
: the Dc mode is activated as default.
