Chauvin Arnoux C.A 1110, Руководство пользователя

Страница: 21 / 26

21
Embedded software update procedure
„
Download the .bin file from our web site, then press and hold the MEM key and switch the instrument on by pressing the
key. The instrument displays BOOT.

MEM
REC
+

„
Release the keys and the instrument displays COPY, indicating that it is ready to receive the new software.
„
Connect the instrument to your PC using the USB cord provided.
„
Copy the .bin file to the instrument as if were a USB key.
„
When the copying is done, press the MEM key and the instrument displays LOAD, indicating that the software is being installed.
„
When installation is done, the instrument displays PASS or FAIL according to whether or not the operation succeeded. If installation
fails, download the software again and repeat the procedure.
„
Then the instrument restarts normally.
After the internal software is updated, it may be necessary to reconfigure the instrument; see § 4.5.