Chauvet VIP drive 43nova, Руководство пользователя

Страница: 27 / 37

Page 23 of 33 VIP Drive 43Nova User Manual Rev. 1
O
PERATION
PIP Crop Horizontal Offset
The PIP Crop Horizontal Offset selects how far to the right in the input video to display, without altering the
dimensions of the PIP itself on the connected panel assembly.
1. Access the PIP Crop menu.
2. Turn the <MENU/ENTER> knob until Start X is selected.
3. Press the <MENU/ENTER> knob.
4. Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
height, from 64–_ _ _ _ . (This range is determined by the PIP Crop Width )
5. Press the <MENU/ENTER> knob.
PIP Crop Vertical Offset
The PIP Crop Vertical Offset selects how far down in the input video to display, without altering the
dimensions of the PIP itself on the connected panel assembly.
1. Access the PIP Crop menu.
2. Turn the <MENU/ENTER> knob until Start Y is selected.
3. Press the <MENU/ENTER> knob.
4. Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
height, from 48–_ _ _ _ . (This range is determined by the PIP Crop Height )
5. Press the <MENU/ENTER> knob.
Image Mosaic
The Image Mosaic function allows multiple VIP Drive 43Nova products to each output a section of the
same video input onto a panel assembly that is too large for a single VIP Drive 43Nova.Scaling must be
enabled for Image Mosaic to function. To access the Image Mosaic menu:
1. Access the Advanced Settings menu.
2. Turn the <MENU/ENTER> knob until Image Mosaic is selected.
3. Press the <MENU/ENTER> knob.
To enable or disable Image Mosaic:
1. Set Scaling to Enable . (Setting Scaling to Disable automatically sets Image Mosaic to
Disable .)
2. Set Auto Fit to Disable .
3. Access the Image Mosaic menu.
4. Turn the <MENU/ENTER> knob until Image Mosaic is selected.
5. Press the <MENU/ENTER> knob.
6. Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select Enable or Disable .
7. Press the <MENU/ENTER> knob.
Total Width in Pixels
The Total Width in Pixels defines the width of the entire connected panel assembly.
1. Access the Image Mosaic menu.
2. Turn the <MENU/ENTER> knob until Total Width Pixels is selected.
3. Press the <MENU/ENTER> knob.
4. Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the total
width in pixels, from 128–24576 .
5. Press the <MENU/ENTER> knob.
The PIP Crop Width must be less than maximum to use this setting. The offset will
only be able to be set as much as the difference between the current PIP Crop Width
and the maximum PIP Crop Width. For example: If the maximum Width is 1920, and
the current Width is set to 1020, the offset can be set from 0–900.
The PIP Crop Height must be less than maximum to use this setting. The offset will
only be able to be set as much as the difference between the current PIP Crop
Height and the maximum PIP Crop Height. For example: If the maximum Height is
1080, and the current Height is set to 680, the offset can be set from 0–400.
The VIP Drive 43Nova does not signal link for HDMI, DVI, or SDI. Video signals that
will be input to multiple products must be split from the source.