Page 14 of 19
SlimPAR PRO Q USB User Manual Rev. 3
IRC-6 Infrared
Remote
Control
The SlimPAR PRO Q USB is compatible with the IRC-6 infrared remote control from
Chauvet. To activate IR mode, follow the instructions below:
1. Press
<MENU>
repeatedly until
SEr
shows on the display.
2. Press
<ENTER>
to accept.
3. Press
<UP>
or
<DOWN>
to select
On
or
OFF
.
4. Press
<ENTER>
.
IRC-6 Operation
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1. Press
<AUTO>
on the IRC-6.
2. Press
<+>
or
<–>
to choose between the different auto programs.
To adjust the speed of the automatic program:
1. Press
<SPEED>
on the IRC-6.
2. Press
<+>
or
<–>
to increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
1. Press
<SOUND>
on the IRC-6.
2. Press
<+>
or
<–>
to
select
Snd1
or
Snd2
.
To adjust sound sensitivity in Sound-Active mode:
1. Press
<SENSITIVITY>
on the IRC-6.
2. Press
<+>
or
<–>
to increase or decrease the sound sensitivity.
Manual Color Control
To choose a specific color with the IRC-6:
1. Press
<MANUAL>
on the IRC-6.
2. Press any number between
<0>
~
<9>
to choose your color.
To manually control the RGB percentage:
1. Press
<MANUAL>
on the IRC-6.
2. Press
<R>
(red),
<G>
(green),
<B>
(blue), or
<A>
(amber) to choose your color.
3. Press
<+>
or
<–>
to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the total output level:
1. Press
<%>
on the IRC-6.
2. Press
<+>
or
<–>
to increase or decrease the output level.
To adjust the strobe rate of the program:
1. Press
<STROBE>
on the IRC-6.
2. Press
<+>
or
<–>
to increase or decrease the strobe rate.
3. Press
<STROBE>
again to turn off the strobe.
To select only fading programs:
1. Press
<FADE>
on the IRC-6.
2. Press
<+>
or
<–>
to
select
P2
or
P4
.
To black out the lights:
1. Press
<BLACK OUT>
on the IRC-6.
This will turn off all the lights until the button is pressed again.
NOTE
: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing
<BLACK OUT>
. You
may have inadvertently activated Black Out.
Содержание SlimPAR Pro Q USB
Страница 1: ...User Manual...
