Chauvet Scorpion Sky, Руководство пользователя

Страница: 10 / 16

3 - P I N T O 5 - P I N C O N V E R S I O N C H A R T
Note!
If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter.
CHAUVET Model No: DMX5M, or DMX5F.
The chart below details a proper cable conversion:
3 P
IN TO
5 P
IN
C
ONVERSION
C
HART
Conductor
3 Pin Female (output) 5 Pin Male (Input)
Ground/Shield
Pin 1 Pin 1
Data ( - ) signal
Pin 2 Pin 2
Data ( + ) signal
Pin 3 Pin 3
Do not use
Do not use
Do not use
Do not use
Universal DMX Controller
This drawing provides a
general illustration of the
DMX Input/Output panel of
a lighting fixture.
Continue the link
Often, the setup for Master-Slave
and Standalone operation requires
that the first fixture in the chain be
initialized for this purpose via either
settings in the control panel or DIP-
switches. Secondarily, the fixtures
that follow may also require a slave
setting. Please consult the
“Operating Instructions” section in
this manual for complete instructions
for this type of setup and
configuration.
Setting up a DMX Serial Data Link
1. Connect the (male) 3 pin connector side of
the DMX cable to the output (female) 3 pin
connector of the controller.
2. Connect the end of the cable coming from
the controller which will have a (female) 3
pin connector to the input connector of the
next fixture consisting of a (male) 3 pin
connector.
3. Then, proceed to connect from the output
as stated above to the input of the following
fixture and so on.
CHAUVET Certified DMX Data Cables
Order Code Description
DMX1.5 DMX Cable 1.5m/4.9ft
DMX4.5 DMX Cable 4.5m/14.8ft
DMX10 DMX Cable 10m/32.8ft
Master/Slave Fixture Linking
1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector
of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin
connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then,
proceed to connect from the output as stated above to the input of the following fixture and so on.
Scorpion Sky User Manual 10
2008-02-05/15:26