RotoSphere™ LED User Manual (Rev. 03)
Page 11 of 18
Configuration
(DMX)
1. Set this product in DMX mode to control it with a DMX controller.
2. Connect this product to a suitable power outlet.
3. Turn this product on.
4. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket of this product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product’s channels.
The RotoSphere™ LED uses up to 4 DMX channels in a 4-channel DMX mode, which
defines the highest configurable address to 509.
If you are not familiar with the DMX protocol, you may refer to the
DMX Primer
section in
the
Technical Information
chapter.
To select the starting address, do the following:
1. Press
<MODE>
repeatedly until
d 1
shows on the display.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to select the starting address.
4. Press
<ENTER>
.
Configuration
(Standalone)
Set this product in one of the standalone modes to control it without a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
Never connect a product that is operating in any standalone mode, whether Static,
Automatic, or Sound to a DMX string connected to a DMX controller. This is
because products in standalone mode may transmit DMX signals that could
interfere with the DMX signals from the controller.
Sound Active
Mode
To enable the Sound Active mode, do the following:
1. Press
<MODE>
repeatedly until
SOUd
shows on the display.
2. Press
<ENTER>
.
3. Turn the music on and adjust the microphone sensitivity knob until the product
starts reacting to the beat of the music.
The product will only respond to the low frequencies of the music (bass and
drums).
Automatic Mode
To enable the Automatic Mode, follow the instructions below:
1. Press
<MODE>
repeatedly until
AUTO
shows on the display.
2. Press
<ENTER>
.
Содержание RotoSphere LED
Страница 1: ...User Manual ...
Страница 6: ...Page 6 of 18 RotoSphere LED User Manual Rev 03 Product Dimensions ...
