Chauvet RotoSphere LED, Руководство пользователя

Страница: 12 / 18

Page 12 of 18 RotoSphere™ LED User Manual (Rev. 03)
Master/Slave
Mode
This mode allows a single RotoSphere™ LED unit (the “master”) to control the actions of
one or more RotoSphere™ LED units (the “slaves”) without the need of a DMX
controller. The master unit will be set to operate in either Automatic or Sound Active
mode, while the slave units will be set to operate in Slave Mode. Once set and
connected, the slave units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Press <MODE> repeatedly until d 1 shows on the display.
2. Press <ENTER> to accept.
3. Connect the DMX input of the first slave unit to the DMX output of the master unit.
4. Connect the DMX input of the subsequent slave units to the DMX output of the
previous slave unit.
5. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either Automatic or Sound mode, as previously
indicated.
2. Make the master unit the first unit in the DMX daisy chain.

Configure all the slave units before connecting the master unit to the DMX
daisy chain.

Never connect a DMX controller to a DMX string configured for Master/Slave
operation because it may interfere with the signals from the master unit.

Do not connect more than 31 slave units to the master unit.
DMX Channel Assignments and Values
4-CH
Channel Function Value Setting
1 Motor Rotation
000

009 No function
010

127 Counter clockwise rotation (slow to fast)
128

137 No function
138

255 Clockwise rotation (slow to fast)
2 Colors
000

031 No function
032

063 Red
064

095 Green
096

127 Blue
128

159 Red + Green
160

191 Red + Blue
192

223 Green + Blue
224

255 Red + Green + Blue
3 Strobe
000

009 No function
010

255 Strobe effect (slow to fast)
4
Automatic and Sound
Modes
000

010 No function
011

249 Automatic programs
250

255 Sound-activated Mode