Chauvet Q-Spot 300 Скачать руководство пользователя страница 19

Страница: 19 / 29

Sound (1 or 2). Random alternates between Auto 1 and Auto
2.

Channels (1.5)

Sets the channel configuration of the fixture to Advanced

channels). V.2006 mode has the same channel configuration

Note: the Q-Spot 300 is NOT compatible

with the Q-Spot 250 when operating in Master/Slave mode,

(15 channels), Basic (12 channels), or V.2006 (13

as the Q-Spot 250, allowing them to be used
interchangeably.

EVEN IF V.2006 mode is selected.

Display (1.6)

Sets whether the display backlight turns off after 60
seconds (60 close) or stays on permanently (bright).

Info (1.7)

the lamp, and the run time of the fixture.

Contains information about the fixture, the run time of

Use (2.6)

Enable or disable the ability to change certain
configuration settings (specifically the settings in the
2.X section).

P/Start (3.1)

The starting point for the pan field of movement. 000 is
the default.

T/Start (3.2)

The starting point for the tilt field of movement. 000 is
the default.

P/Finish (3.3)

The ending point for the pan field of movement. 255 is the
default.

T/Finish (3.4)

The ending point for the tilt field of movement. 255 is
the default.

Range (3.5)

Enables or disables range limitation.

Lamp (4.1)

Enables or disables lamp control via DMX. “DMX” allows DMX
lamp control, “System” restricts lamp control to the
fixture console only.

Reset (4.2)

Enables or disables reset control via DMX. “DMX” allows
DMX reset control, “System” restricts reset control to the
fixture console only.

User_key (5.1)

Enter the four-digit number used to reveal basic hidden
menus 6.1, 7.1, and 8.1.

The factory default is 3333.

Password (5.2)

Enter the four-digit number used to reveal all hidden
menus. The password is for Chauvet use only.

User_key (6.1)

s number must be entered to reveal basic

Enter a four-digit number to set the “User_key” for the
fixture. Thi
hidden menus.

Enter a four-digit number to set the “Password” for the
fixture. This number must be entered to reveal all hidden
menus.

Password (6.2)

LampTime (7.1)

Clear the lamp time for the fixture. This should be done
every time the lamp is replaced to accurately monitor lam
usage.

RunTime (7.2)

run time for the fixture.

Clear the

Default (8.1)

Reset all settings to the factory default.

Q-Spot 300 User Manual

8/27/2007 5:35 PM

Содержание Q-Spot 300






























Результаты поиска

Содержание Q-Spot 300

Отзывы:

Похожие инструкции для Q-Spot 300

Бренды по названию

Популярные бренды

Chauvet Q-Spot 300, Руководство пользователя

Результаты поиска

Содержание Q-Spot 300

Отзывы:

Похожие инструкции для Q-Spot 300

Бренды по названию

Популярные бренды