Chauvet Q-Spot 300, Руководство пользователя

Страница: 21 / 29

Operation
Stand-Alone Mode (Sound-Active, Auto Mode):
unit will auto change in Auto
ressing <ENTER> .
layed (Auto1, Sound1, Auto2, or Sound2) and
select it.
al microphone in Sound Active
Master/Slav M
t a controller.
select it by pressing <ENTER> .
rough until “1.4-Operation” is displayed, and select it.
rough until the desired setting is displayed (Auto1, Sound1, Auto2, or Sound2) and
select it.
w frequencies of music via the internal microphone in Sound Active
elect it by
yed and select it.
9) The unit will do exactly what the Master does.
DMX Mode
re unfamiliar with
)
4) Scroll through until “DMX” is displayed and select it.
5) Press menu until the root menu is displayed, and scroll through until “1-Info” is displayed.
6) Scroll through until “1.1-Address” is displayed, and select it.
7) Use the down and up buttons to set the desired address. Note that <DOWN> will scroll through
which digit is changeable and
<UP>
will scroll through the different numbers.
8) Press <ENTER> twice to store the address.
9) The unit can now be controlled by any universal DMX controller.
This mode allows a single unit to run to the beat of the music, or the
Mode.
1) Press the <MENU> button to access the display.
2) Scroll through until “1-Info” is displayed and select it by p
3) Scroll through until “1.4-Operation” is displayed, and select it.
4) Scroll through until the desired setting is disp
5) The unit will react to the low frequencies of music via the intern
mode, or the unit will auto change in Auto Mode.
e ode (Master Sound, Master Auto):
This mode will allow you to link up to 32 units together withou
1) On the Master, press the <MENU> button to access the display.
2) Scroll through until “1-Info” is displayed and
3) Scroll th
4) Scroll th
5) The unit will react to the lo
mode, or the unit will auto change in Auto Mode.
6) On the Slave fixtures, press the <MENU> button until 1-Info is displayed and s
pressing <ENTER> .
7) Scroll through until “1.4-Operation” is displayed, and select it.
8) Scroll through until “Slave” is displa
This mode allows the unit to be controlled by any universal DMX controller. If you a
DMX, please read the DMX Primer on page 26.
1) Press the <MENU> button to access the display.
2) Scroll through until “1-Info” is displayed and select it by pressing <ENTER> .
3 Scroll through until “1.4-Operation” is displayed, and select it.
Q-Spot 300 User Manual 21
8/27/2007 5:35 PM