O-
Beast™ User Manual
8
6/2/2009 2:39 PM
Master
Slave
Slave
Hanging Clamp
Master/Slave Fixture Linking
1. Link the fixtures as indicated in steps 1 to 4 of the previous section.
2. The setup of the Master/Slave or Stand-alone operation often requires the first fixture in the chain
to be initialized accordingly via settings in the control.
3. In addition, in the Master/Slave mode, the fixtures that follow may also need to be initialized as
“slaves.” Please consult the
Operating Instructions
section in this manual for complete
instructions for this type of configuration.
Mounting
Orientation
This fixture may be mounted in any safe position.
Rigging
It is important never to obstruct the vents pathway. Mount the fixture usi
ng, a suitable “C” or “O” type
clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the
desired position, retighten both knobs.
When selecting an installation location, consider ease of access to the fixture for operation and
routine maintenance.
Always use safety cables.
Never mount the fixture in places where it may be exposed to rain, high humidity, extreme
temperature changes or restricted ventilation.
The clamp is sold separately
