Hurricane 1800 FLEX QRG
EN
4
AC Power
This product has a fixed voltage power supply and it can work with an input voltage
of either 120 V, 60 Hz or 230 V, 50 Hz, depending on the specific model.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via the main power breaker or by
unplugging it.
Fuse
Replacement
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the safety cap out of the housing.
4.
Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5.
Re-insert the fuse holder and reconnect power.
FC-T Remote
Controller
The FC-T wired timer controller allows you to automatically trigger fog output
by setting interval, continuous, or duration time. LED indicator lights display the
machine and controller’s current state. Rotary knobs set interval, output, and
duration times, while manual and continuous buttons allow overriding control.
For more information, download the user manual from the Chauvet website
1.
Connect the fog machine to power.
2.
Plug the FC-T remote controller into the Remote Control socket on the back
of the fog machine.
3.
Press the
<TIMER>
,
<CONTINUOUS>
, or
<MANUAL>
button located
on the controller to trigger fog output.
FC-T Remote
Overview
•
The
<TIMER>
button activates automatic timed fog output.
•
The
<CONTINUOUS>
button allows continuous fog output until the button is
pressed again.
Fluid consumption will be significantly increased during
Continuous Output mode.
•
The
<MANUAL>
button allows momentary fog output for as long as the button
is held down.
Note: The duration of fog output is based on the capability of the fog machine.
MAXIMUM Continuous Output setting recommended is 6. All levels above 6,
the fogger will cycle itself with intermittent bursts of fog during reheat
program.
1
15
Max Continuous
Fog at Output 6
Содержание Hurricane 1800 Flex
Страница 1: ...Quick Reference Guide ...
