3.
S
ETUP
Quick Start
1) Unpack the GrafXpress unit from the box.
2) Insert memory card into slot provided. Memory card should be inserted with pins facing down.
3) Connect the DB25 to the ILDA DB25 output of the controller to the input of your LG-80 (fixture
should be powered off).
4) Connect the power supply to the power jack and a wall outlet.
5) Turn Power switch to the “On” position. (User interface will read “GrafXpress”)
6) Verify that the Laser Ready indicator is lit. (If not lit, press interlock button to sync)
7) Insert the DB-9 connector into the DB-9 interlock connection (
applies to lasers with greater
than a 5mW output and DB-9 interlock input
)
8) Clear area in front of laser
9) Turn laser projector power to the “On” position
10) Turn key switch to the “On” position (key will be horizontal)
11) Press play on the user interface.
Note: Please see video tutorial on CD
GrafXpress Basic Rackmount
7
1/11/2008 3:18 PM
