Chauvet EVE E-100Z, Руководство пользователя

Страница: 9 / 16

Page 7 of 14 EVE E-100Z V3 User Manual Rev. 1
O
PERATION
4. O
PERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the
Product Overview to see the button locations on the control panel.
Menu Map
Configuration (DMX)
The EVE E-100Z V3 works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website
http://www.chauvetlighting.com/downloads/
DMX_Primer_rev05_WO.pdf .
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product’s channels.
The EVE E-100Z V3 uses up to 3 DMX channels, which defines the highest configurable address as
510 .
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com .
To select the starting address, do the following:
1. Press <MENU> repeatedly until 1-CH or 3-CH shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select the starting address, from d 1–512 .
4. Press <ENTER> .
D-Fi USB Connectivity
The PN is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from Chauvet
DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D-Fi receiving/
transmitting channel, then plug it into the D-Fi USB port.
B
UTTON
F
UNCTION
<MENU> Press to find an operation mode or to back out of the current menu option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
M
ODE
P
ROGRAMMING
L
EVELS
D
ESCRIPTION
DMX Mode
1-CH
d 1–512 Selects DMX personality and starting address
3-CH
Dimmer U--
d000–255 Dimmer level
S000–255 Strobe speed
Dimmer
Speed Mode
dIM
OFF
Dimmer speed settings, off, fast, medium, or slow
dIM1
dIM2
dIM3
Fan FAN
AUTO Fan speed according to product temperature
ON Fan always on
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so
may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual
display control / menu buttons will be unavailable until you unplug the D-Fi USB. The
priority levels are:
1. D-Fi USB
2. Wired DMX 3. Manual Digital Display/Menu Buttons