background image

Page 2 of 14

 B

EFORE

 Y

OU

 B

EGIN

EVE E-100Z V3 User Manual Rev. 1

Product at a Glance

Safety Notes

Use on Dimmer

Auto Programs

Outdoor Use

Auto-ranging Power Supply

Sound-Active

Replaceable Fuse

DMX

User-Serviceable

Master/Slave

Always connect the product to a grounded circuit to avoid the risk of electrocution.

Always disconnect the product from the power source before cleaning or replacing the 
fuse.

Avoid direct eye exposure to the light source while the product is on.

Make sure the power cord is not crimped or damaged.

Never disconnect the product from power cord by pulling or tugging on the cord.

If mounting the product overhead, always secure to a fastening device using a safety cable.

Make sure there are no flammable materials close to the product when operating.

Do not touch the product’s housing when operating because it may be very hot.

Always make sure that the voltage of the outlet to which you are connecting the product is 
within the range stated on the decal or rear panel of the product.

The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the 
product to rain or moisture.

Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from 
adjacent surfaces.

Be sure that no ventilation slots on the product’s housing are blocked.

Never connect the product to a dimmer.

Make sure to replace the fuse with another of the same type and rating.

Never carry the product from the power cord or any moving part. Always use the hanging/
mounting bracket.

The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at 
higher temperatures.

In the event of a serious operating problem, stop using the product immediately.

Never try to repair the product. Repairs carried out by unskilled people can lead to damage 
or malfunction. Please contact the nearest authorized technical assistance center.

To eliminate unnecessary wear and improve its lifespan, during periods of non-use 
completely disconnect the product from power via breaker or by unplugging it.

Keep this User Manual for future use. If you sell the product to someone else, be sure that 
they also receive this document.

Содержание EVE E-100Z

















Отзывы: