product warranty card
name model manufact buy date
date
Company name: contact person:
Address: Tel:
Tel: Seal:
Note: The above blank must be fill in ,seal truthfully
by
the end-user ,
(
warranty period and terms ,as follow)
Warranty: one year
Warranty terms:
1, failures at the warranty period In the normal State,
In
Accordance with the terms of this warranty,To produce the
warranty
card and purchase notes (photocopy), enjoy free
maintenance service
In the designated service center or the manufacturer.
2, during the warranty , there will Implementation of the
paid
Service,as follow :
(1)
Can not show the valid warranty card
(2)
Omission,alteration or no sales shop name on the
warranty
Card.
(3)
The
fault or damage a
s the non-resistance
(4)
The
fault or damage a
s the transport, unloading
(5)
The
fault or damage as not follow the
instructions
(6)
Disassembe the light Without factory authorization
or non-
professionals
(7) Use of non-factory authorized non-matching control
system for
factory
(8) Consumables (light bulbs)
3W*54 PAR
Operating instruction
Thank you for purchasing this LED products.This LED product is noble and
practical .It also has the features in elegant appearance , reasonable design in
circuit, fewer-consumes in electricity
，
high brightness , good decoration effect
and so on .It may use in the indoor stage, the building, the square, the limestone
cave’
s background dyeing or making the frequency dodge effect.
This product may use 90-250V city electricity, and are universal in the
world
This lamps and lanterns use 54, each power is 1W or the 3W ultra Gao
Liang light emitter diode, and its brightness can compare with the 500 tiles
above, and does not need to install the chromo paper or to change the chroma,
red, green, blue color light emitter diode may mix seven mainly colors and
several hundreds of different colors, brightness color, moreover the lamps and
lanterns may adjust the light voluntarily, does not need the expensive silicon
box, normal use, the light bulb life surpasses for three years.
When using lamps and lanterns ,it will give off heat, forbidden touching,
against scalding, This lamps and lanterns should prevent overheated. The
temperature should be situated between 5-45
℃
when it used .After closing the
lamps and lanterns’ power source,
it should wait for several minutes untill its
natural cooling. This lamps and lanterns must install in the well ventilating
place. The lamp body should not cover by other goods or the package. Around
the lamps and lanterns in 1 meter cannot lay aside any flammable, explosive or
heating chemical goods.
The lamps and lanterns has the high interior tension circuit, the laymen
please do not turn on the lamps and lanterns lid, by against electric shock..
Before the circular energization, please check out careful inspection lamp
body, the power line and the poison-pen letter, insert prime, guarantees
perfectly . If the power line damaged, it may possibly causes drain, and other
serious accident. The laymen can not make the revision or the service work
arbitrarily to this lamps and lanterns. If this kind of situation happened, and
caused the adverse consequences, we don
’
t undertake any responsibility.
