Appendix
DMX-150SQ User Manual
11
2005-05-05/09:34
DMX Channel Values
Channel
Value
Function
1
000
002
003
012
013
022
023
032
033
042
043
052
053
062
063
072
073
082
083
092
093
102
103
112
113
122
123
132
133
142
143
159
160
249
250
255
Gobo/Color Wheel
Blackout
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Gobo 9
Gobo 10
Gobo 11
Gobo 12
Gobo 13
Gobo 14
Open
Gobo Spin: Slow > Fast
Audio Mode (stand alone)
2
000
010
011
255
Shuffle/Strobe
Stop
Slow > Fast
3
000
127
128
255
Squeeze
Small > Wide
Oscillation: Slow > Fast
4
000
000
001
101
002
159
160
255
Effect Rotation
Stop
Counter clockwise rotation: Fast > Slow
Stop
Clockwise rotation: Slow > Fast
Maintenance
To maintain optimum performance and minimize wear fixtures should be cleaned frequently. Usage
and environment are contributing factors in determining frequency. As a general rule, fixtures should
be cleaned at least twice a month. Dust build up reduces light output performance and can cause
overheating. This can lead to reduced lamp life and increased mechanical wear. Be sure to power off
fixture before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust
collected on external vents and internal components. Clean all glass when the fixture is cold with a
mild solution of glass cleaner or Isopropyl Alcohol and a soft lint free cotton cloth or lens tissue. Apply
solution to the cloth or tissue and drag dirt and grime to the outside of the lens. Gently polish optical
surfaces until they are free of haze and lint. Do not to touch the lamp glass when cleaning fixture. Oil
and dirt can cause damage and premature aging of the lamp. In the event that the lamp is touched or
becomes dirty, clean the lamps with an alcohol wipe.
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates:
damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit
’
s
optics. Clean with soft cloth using normal glass cleaning fluid. - Always dry the parts carefully. - Clean
the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
