Chauvet Colordash Скачать руководство пользователя | Manualshive

Страница: 14 / 28

background image

COLORdash™ Quad User Manual

14

6/1/2010 1:41 PM

Often, the setup for Master-Slave
and Standalone operation
requires that the first fixture in the
chain be initialized for this
purpose via settings in the control
panel. Secondarily, the fixtures
that follow may also require a
slave setting. Please consult the
“Operating Instructions” section in
this manual for complete
instructions for this type of setup
and configuration.

Master

Slave

Slave

This drawing
provides a general
illustration of the
DMX Input/output
panel of a lighting
fixture.

Universal DMX

Controller

Continue the link

3-Pin to 5-Pin Conversion Chart

If you use a controller with a 5-pin DMX output connector, you will need to use a 5-pin to 3-pin
adapter. CHAUVET Model No: DMX5M, or DMX5F.

The chart below details a proper cable conversion:

3-P

IN TO

5-P

IN

C

ONVERSION

C

HART

Conductor

3-Pin Female (Output)

5-Pin Male (Input)

Ground/Shield

Pin 1

Pin 1

Data ( - ) signal

Pin 2

Pin 2

Data ( + ) signal

Pin 3

Pin 3

Not used

Pin 4

Not used

Pin 5

Setting up a DMX Serial Data Link

1. Connect the (male) 3 or 5-pin connector

side of the DMX cable to the output
(female) 3 or 5-pin connector of the
controller.

2. Connect the end of the cable coming from

the controller which will have a (female) 3
or 5-pin connector to the input connector of
the next fixture consisting of a (male) 3 or
5-pin connector.

3. Then, proceed to connect from the output

as stated above to the input of the following
fixture and so on.

CHAUVET Certified DMX Data Cables

Order Code

Description

DMX1.5

DMX Cable 1.5 m/4.9 ft

DMX4.5

DMX Cable 4.5 m/14.8 ft

DMX10

DMX Cable 10 m/32.8 ft

Master/Slave Fixture Linking

1. Connect the (male) 3-pin connector side of the DMX cable to the output (female) 3-pin connector

of the first fixture.

2. Connect the end of the cable coming from the first fixture which will have a (female) 3-pin

connector to the input connector of the next fixture consisting of a (male) 3-pin connector. Then,

proceed to connect from the output as stated above to the input of the following fixture and so on.

«
...
12
13
14
15
16
...
»

Содержание Colordash





























Отзывы:

Нет отзывов

Похожие инструкции для Colordash

Бренд: Patriot Lighting Страницы: 8

Бренд: Wagan Страницы: 7

Robus RVA14RGB2050

Бренд: LED Group Страницы: 2

3d head pro lui

Бренд: Occhio Страницы: 10

Бренд: OttLite Страницы: 2

UltraBlade UB-21

Бренд: Wildfire Страницы: 25

Бренд: RAB Lighting Страницы: 2

HAL-PRM-150W-LED-100

Бренд: Larson Electronics Страницы: 3

Бренд: ADJ Страницы: 4

Concert EX1S OR3

Бренд: WHITECROFT LIGHTING Страницы: 2

Бренд: Martec Страницы: 7

Бренд: EuroLite Страницы: 2

Бренд: Squareled Страницы: 15

Light Cannon 100 DIVELIGHT

Бренд: Underwater Kinetics Страницы: 2

Бренд: KAM Страницы: 7

Decorative Arco 4833

Бренд: Lightolier Страницы: 1

Flexidel BASIC-FLOOD-10W

Бренд: BridgeLux Страницы: 2

Бренд: Satco Products Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды