Chauvet ColorDash Batten-Tri, Руководство пользователя, Страница: 13 / 26

Operation
COLORdash™ Batten-Tri User Manual Rev. 02a -9-
Continued from previous page
Auto Programs
Auto programs allow for dynamic RGB color mixing without a DMX controller.
1) Go to AUTO .
2) Select the desired auto program ( AUTO 01 ~ 10 or CUSTOM 01 ~ 10 )
3) Select the speed ( SP 000~255 ).
You cannot edit any of the auto programs (AUTO 01~10). However you can edit
custom programs CUSTOM 01~10 (see Edit Customs).
Edit Customs
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1) Go to EDIT .
a) Select the desired custom program ( CUSTOM 01~10 ).
b) Select the desired scene ( SCENE 01~30 ).
c) Select the desired color or effect ( RED , GREEN , BLUE , STROBE , TIME, or
FADE ).
d) Select the color or effect value ( 000~255 for colors and timers, or 00~20 for
strobe).
e) Repeat for the other colors or effects.
f) Return to the SCENE level (step “3”).
2) Repeat the settings of colors and effects for the other scenes.
Master/Slave
The Master/Slave mode allows a group of COLORdash™ Batten-Tri fixtures (the slaves)
to execute simultaneously the same program, whether auto or custom, that another
COLORdash™ Batten-Tri fixture (the master) is executing, and without a DMX
controller.
1) Set the master unit:
a) Set the running mode to DMX as explained in “ DMX Control Without ID
Addressing”
b) Select an auto program as explained in “ Auto Programs ”.
2) Set the slave units:
a) Go to RUN .
b) Select SLAVE .
•
The fixture that is set to run a program, whether Auto or Custom, or to operate in Static
mode automatically becomes the master.
•
Do not connect a DMX controller to the master or slave fixtures.
Color Settings
The COLOR setting determines how the COLORdash™ Batten-Tri generates the white
color based on various RGB settings.
1) Go to SETTINGS .
2) Select COLOR .
3) Select OFF , RGB TO W , or UC .
•
When Color is “OFF”, setting the RGB faders to “255” produces a maximum
output, although the resulting color may not be a balanced white.
•
When Color is “RGB TO W”, setting the RGB faders to “255” produces an
output as defined by the configured White color (see Whites Setting).
•
When Color is “UC”, setting the RGB faders to “255” produces an output that
matched that of older fixtures (Universal Color).
Continues on the next page