Chauvet ColorDash Batten-Tri, Руководство пользователя, Страница: 12 / 26

Operation
-8- COLORdash™ Batten-Tri User Manual Rev. 02a
4. Operation
Control Panel
Description
Button Function
<MENU>
Exits from the current menu or
function
<ENTER>
Enables the currently displayed
menu or sets the currently
selected value in to the current
function
<UP>
Navigates upwards through the
menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through
the menu list and decreases the
numeric value when in a function
Control Options
You can set the COLORdash™ Batten-Tri start address in the 001~512 DMX range.
This allows for the control of up to 46 fixtures in the 11-channel TOUR personality. In
addition, the ID address system allows you to assign up to 66 fixtures for each starting
DMX address, thus multiplying the number of fixtures you can control within a single
universe. You can access the fixture’s ID address system from channel 10 when in the
TOUR DMX personality.
When programming live performances as well as cues that need to trigger on
demand or on a time line, program no more than 10 fixtures on ID addressing per
DMX channel. This is to remain within a one-second execution time.
Programming
Carry out all the programming procedures indicated below from the control panel. Refer
to the
Menu Map on page 13 to learn how the menu options relate to each other.
To go to an option, press <MENU> repeatedly until the option shows on the display.
To select an option value, press <UP> or <DOWN> until you see the desired value and
press <ENTER> to accept it.
To exit to the previous menu level, press <MENU> .
DMX Personality
This setting allows the user to choose a particular DMX personality.
1) Go to PERSON .
2) Select the desired personality ( TOUR , PIXEL , ARC1 , ARC1 + D , or HSV ).
DMX Control
After selecting the DMX personality, select the following:
1) Set the running mode:
a) Go to RUN .
b) Select DMX .
2) Set the starting address:
a) Go to ADDRESS .
b) Select the starting address ( 001~512 ).
Static Color
The Static Color mode allows for permanent RGB color mixing without a DMX controller.
1) Go to STATIC .
2) Select the desired color ( RED , GREEN , or BLUE ).
3) Select the desired color value ( 0 ~ 255 ).
4) Repeat for the other two colors.
5) Select STROBE .
6) Select the desired frequency ( 0 ~ 20 ).
Continues on the next page