Operation
COLORado™ Deco Quad 1 Tour User Manual Rev. 1
-9-
Auto Programs
Auto programs allow for dynamic RGBW color mixing without a DMX controller.
1. Go to
AUt
.
2. Select the desired auto (
A. 01~10
)
.
You cannot edit any of the auto programs (AUTO 01~10).
Master/Slave
The Master/Slave mode allows a group of COLORado™ Deco Quad 1 Tours (the slave
products) to simultaneously duplicate the output of another COLORado™ Deco Quad 1
Tour (the master product) without a DMX controller.
1. Set each of the slave products:
a. Go to
rUN
.
b. Select
SLA
.
2. Set the master product:
a. Set the running mode to
512
as explained in
DMX Control
.
b. Select an auto program as explained in Auto Programs above, or a static mix
of colors.
•
The master product is the one that runs a program whether in Auto or Static
Color mode.
•
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master
product.
•
The master product should be the first product in the daisy chain.
Color Settings
The
CoL
setting determines how the COLORado™ Deco Quad 1 Tour generates the
white color based on various RGB settings.
1. Go to the
SEt
main level.
2. Select
COL
.
3. Select
oFF
,
rgb
, or
UC
.
oFF:
When all the RGB faders are set to
255
, the output is maximum, although
the resulting white color may not be balanced.
rgb:
When all the RGB faders are set to
255
, the resulting output is defined by
the configured White color (see
White Calibration
).
UC:
When all the RGB faders are set to
255
, the output matches that of less
efficient products (Universal Color).
