Setup
COLORado™ Deco Quad 1 Tour User Manual Rev. 1
-7-
Mounting
Before mounting this product, read and follow the
Safety Notes
in this manual.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
The COLORado™ Deco Quad 1 Tour consists of a double-bracketed yoke and the body
of the product CHAUVET® recommends using the following general guidelines when
mounting this product.
•
When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
•
Make sure to mount this product away from any flammable material as indicated in
the
Safety Notes
.
•
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•
If hanging this product, make sure that the mounting location can support the
product’s weight. Refer to the
Technical Specifications
chart for the weight-bearing
requirements of this product.
•
When hanging this product, always secure to a fastening device using a safety cable
(included).
Procedure
The COLORado™ Deco Quad 1 Tour comes with a double-bracketed yoke to which you
can either attach mounting clamps for hanging or simply use as a floor stand. You must
supply your own mounting clamps. Make sure the clamps are capable of supporting the
weight of this product. You will have to use at least one mounting point per product.
Product Mounting Diagram
Floor Mounting
Overhead Mounting
