Operation
February 16, 2010
-13-
COLORado™ 1 Tour User Manual Rev. 01f
TOUR Notes
These notes intent to clarify the way the TOUR DMX personality works.
Master Dimmer
•
Channel 1 controls the intensity of the currently projected color.
•
When the slider is at the highest position (
255
) the intensity of the output is at its
maximum
Red, Green, Blue &
White Color Selection
•
Channels 2, 3, 4 and 5 control the intensity ratio of each of the Red, Green, Blue
and White LEDs
•
When the slider is at the highest position (
255
), the intensity of each color is at its
maximum
•
You can combine channels 2, 3, 4 and 5 to create over four billion colors
Color Macros
•
Channel 6 selects the required Color Macro
•
Channel 6 has priority over channels 2, 3, 4 and 5
•
Channel 1 controls the intensity of the Color Macro
Strobe
•
Channel 7 controls the strobe of channels 2~6
ID Address Selection
•
Channel 11 selects the target ID address
•
Each independent DMX address may have up to 66 independent ID addresses
•
An ID address of
0
will activate all ID address locations
Auto
•
Channel 8 selects the preset Auto programs
AT. 01~10
or the custom Auto
programs
CUS. 01~10
•
When activating the custom Auto programs
CUS. 01~10
, it is possible to control
the Step Time and Fade Time using channels 2 and 3 respectively
•
Channel 8 has priority over channels 2, 3, 4, 5, 6 and 7
Dimmer Speed
•
Channel 9 is for selecting the dimmer mode and speed. When
Dimmer
is set to
Off,
the Red, Green, Blue, White and Dimmer outputs are linear with the faders.
Otherwise,
Dim1
is the fastest dimmer curve, while
Dim4
is the slowest.
