Page 24 of 33
LED Module Care and Replacement
F2 User Manual Rev. 1
Removing and Replacing the LED Masks
To replace one of the LED masks on an F2 LED module, follow the instructions below:
1.
Remove the module from the F2 (see
).
2.
Gently lift the edges of the mask with a thin prying tool.
3.
Work the prying tool toward the center, gently lifting the mask from the LEDs.
4.
Place the new LED mask in the space, with the rear (clips) side facing in towards the product.
5.
Push the mask in firmly until it is completely flush with the rest of the masks on the product. A
roller tool is recommended for this procedure.
•
A dull plastic prying tool is recommended to prevent LED damage.
•
Bending the mask too much will permanently stretch it beyond usability.
•
Take SPECIAL CARE to not pry off any LEDs!
•
When in doubt, seek expert assistance or advice!
2x8 = 16 Masks
per Module
Front Side - Anti-Reflective Coating
Rear Side - Clips
(Shiny Surface)
Содержание F2
Страница 1: ...User Manual ...