Page 8 of 33
Mounting
F2 User Manual Rev. 1
4. Mounting
Orientation
Each F2 is constructed of die-cast magnesium. This ensures each panel is stable and easy to install. Each
panel also has convenient built-in handles located on the top and bottom of the backside of the panel along
with two alignment conicals on the top and 4 alignment bolts (feet) on the bottom. This combination
enables you to easily pick up and securely hold each panel while mounting and working with the panels.
The F2 can be assembled to provide any number of modular designs. The panels on the top can be
securely hung from a truss or other stable surface. Always hang in a safe position with adequate space for
ventilation, configuration, and maintenance. Chauvet recommends following the general guidelines below.
•
When selecting an installation location, consider ease of access for operation and routine maintenance.
•
Make sure to hang away from any flammable material, as indicated in the
•
Never mount in places where rain, extreme temperature changes, or restricted ventilation may affect it.
•
Make sure that the structure and attachment points to which you are hanging the panels can support
the weight.
•
Make sure that all load-bearing hardware used can support the weight.
•
See the
for the weight requirement of each F2.
Mounting Points
1
2
3
1
1
1
2
2
2
2
3
3
3
3
1
1
1. Threaded Mounting
Holes Size M12 (x6)
2. Male Speego
Connection
3. Female Speego
Connection
4. Feet (Alignment
Bolts) (x4)
5. Handles
4
4
5
5
5
5
5
5
Содержание F2
Страница 1: ...User Manual ...