Page 10 of 33
Mounting
F2 User Manual Rev. 1
Mounting with Dual Function Rig Bar (Hanging)
1.
Loosen the spring knobs on the male Speego connections of each Rig Bar to be used.
2.
Insert alignment conicals into the alignment holes and allow magnets to connect.
3.
Insert the Rig Bar Speego locking bars into the female Speego connections on the F2.
4.
Twist the spring knob on the Rig Bar Speego until it locks into place.
5.
Twist the tightening knobs clockwise until the F2 products are secure to the Rig Bars and aligned
correctly to each other.
6.
Install the side latches of the panels to each other (
) only after
ensuring the alignment is correct.
7.
To detach the Rig Bar from the F2, reverse the previous steps. Tilt the panels away from each
other to safely release the magnetic attachments.
When mounting a video panel assembly together, mount the entire top row of panels using
only the spring knobs before moving on to step 5.
The alignment magnets on the F2 and Dual Function Rig Bar are designed to temporarily
hold the weight of the panel to allow the user to properly align and tighten the panel into
place.
Warning! The magnetic attachments are not load-bearing, and are intended for alignment
assistance only. Do not release panel until the hanging hardware has been fully secured.
Alignment
Conical (x2)
Male Speego
Connection
Tightening
Knob
Spring
Knob
Locking
Bar
Rig Bar Speego
Female Speego
Connection (x2)
(For use with
DRB Curve Kit)
Alignment
Bolts
Alignment
Holes (x2)
Alignment
Magnets (x3)
Bottom View
Back View
Side View
Содержание F2
Страница 1: ...User Manual ...