ChatterBox GMRS XI, Руководство пользователя

Страница: 17 / 24

VOX ADJUSTMENT INSTRUCTIONS
It is highly suggested that each new user practice adjusting their radio
before riding. It’s simple, quick and effective.
A) With the unit off, turn the VOX knob to the “Hi” (high)
sensitivity position.
B) Place the helmet on your head (with the ChatterBox fully
install).
C) Speak into the microphone in a normal voice.You should
hear your voice in the speakers. Adjust the volume to a
comfortable setting. If you don’t hear anything turn the
volume up. If you still don’t hear anything check all the wire
connections and make sure the VOX is set the full “Hi”
Position.
D)Next, continue to speak while turning the VOX knob
towards the “Lo” setting. As you do this you’ll notice that
you must speak louder to activate the microphone.
E) When the knob is turned almost to “Lo”, you’ll find that
you must talk very loud to activate the micro phone.This
is where the VOX must be set during high speed riding or
in loud wind conditions.
F) Next, turn the VOX knob to the full “Lo” position. When
the VOX is set at this position the microphone is off and
no transmitting is possible.
G) It is highly suggested that you always begin your rides with
the VOX set close to the full “Lo” setting. Once under way
you can then fine tune the sensitivity.
18
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 17