ChatterBox GMRS XI, Руководство пользователя

Страница: 14 / 24

1. For the open face headset, use the plastic tie clip to secure the
windsock. For the full face headset, microphone covers come pre-
installed.
2. Helmets without speaker pockets. Attach the foam covers to the
speakers respectively (Drawing 1). Attach the hard velcro disk to
the back of the speakers (Drawing 2). Attach the soft velcro disks
to the helmet liner.The position of the soft velcro disks will deter-
mine the position of the speakers.
3. Attach the right speaker (the long cord) to the soft velcro disk that
you applied to the helmet liner. Attach the left speaker (the short
cord) to the soft velcro disk that you applied to the helmet liner..
For helmets with speaker pockets, simply insert the speaker in the
pocket.Then use the wooden stick to gently tuck the speaker wire
between the headliner and the shell (Drawing 3)
4. For full face headset. Attach the soft rectangular velcro piece to the
chin bar. Keep in mind the position of this velcro will determine the
position of the mic. Apply the mic to the soft rectangular velcro.
Then use the wooden stick to gently tuck the mic wire between
the headliner and the shell (Drawing 4).
HEADSET INSTALLATION
15
1 2
3 4
ChatterBox 24P, 05-07 5/17/07 8:32 PM Page 14