Chatter Box BiT-3, Руководство пользователя

Страница: 8 / 24

7
③
For open-face helmet, attach soft Velcro disk inside of the helmet at chic level
and place the boom-microphone on it. Additionally, fix the boom-stick by using
the butterfly shaped holder to support it.
④
For full-face helmet, attach soft Velcro disk on the chin bar of the helmet and
attach hard Velcro disk to the microphones.
⑤
Mount the soft Velcro disks on the liner of your helmet, in the indentation of the
helmet padding, where your ears would line up. For the best sound quality, be
sure to locate the speakers to the right location.
⑥
Attach the right speaker (with the longer wire) to the corresponding Velcro disk
that you applied on the helmet liner. Attach the left speaker (with the shorter
wire) to the other Velcro disk.
⑦
Re-install removed inner pad back on the helmet.
※
CAUTION : Changing the position of the Velcro stickers for speakers and
microphones more than one time may result in poor adhesion. (You
can purchase Velcro separately from our website.)
Installation of BiT-3 using cradle
①
Prepare the provided cradle, bracket, screws and L-wrench.
②
Attach the metal bracket to the cradle using screws but do not fully tighten at
this stage.
③
Slide the bracket iron plate into the gap between the helmet shell and the inner
pad.
Open-face microphone
Speakers
Full-face microphone
Cradle and Bracket