Chattanooga Wireless Professional, Руководство пользователя, Страница: 15 / 283

2 . S a F e t y i N F O r M at i O N
14 EN WIRELESS PROFESSIONAL
Warning!
Equipment malfunction - these warnings can cause equipment malfunctions that result in
patient hazards
- Magnetic and electrical fields are capable of interfering with the proper performance of
the unit. For this reason make sure that all external devices operated in the vicinity of the
unit comply with the relevant EMC requirements. X-ray equipment, MRI devices, radio
systems and cell phones are possible sources of interference as they may emit higher
levels of electromagnetic radiation.
Keep the unit away from such equipment and verify its performance before use.
- Do not use the Wireless Professional within one metre of short wave or microwave
devices as this could alter the currents generated by the stimulator. If you are in any
doubt as to the use of the stimulator in close proximity to another medical device, seek
advice from the manufacturer of the latter or from your doctor.
- Exercise caution when using electrotherapy while the patient is connected to monitoring
equipment with electrodes attached to the body. Stimulation could disrupt the signals
sent to the monitoring equipment.
- Refer
repair
and
maintenance
to autorised persons. Persons are authorized after
training by a specialist trained and commissioned by the manufacturer.
- Inspect the Wireless Professional and it’s accessories for damage and loose connections
at least
once a year.
Damaged and worn parts must be immediately replaced with
original spare parts by autorised staff.
- Do not apply stimulation near the area of an implant, such as cochlear implants, pacemakers,
skeletal anchorage or electric implants. This could cause an electrical shock, burns, electrical
interference or death
- Never use the Wireless Professional or the AC adaptor if it is damaged or open. There is a risk of
electric shock.
- Disconnect the AC adaptor immediately if there is abnormal heating or smell, or if smoke comes
from the AC adaptor or the device.
- Do not place the docking station in a confined space (carrying case, drawer etc.) when charging
the device. There is a risk of electrocution.