R-NET
www.chasswheel.com
rev. 1
2014-05-08
43
1
SAFETY RECOMMENDATIONS
THIS USER MANUAL IS FOR USE, ONLY TOGETHER WITH THE OWNERS HANDBOOK! THIS
SECTION EXPLAINS ONLY CONNECTED MATTERS CONCERNING USE OF THE STAND SUPPORT
SYSTEM.
SAFE DRIVING
Do not use the Stand Support System, if you suspect that its use is not safe. For safety of use, the
condition of the appliance, environmental conditions and the user’s ability to control the machine
must be observed.
On an inclined surface, driving in the erect position is absolutely forbidden due to the dangers of
overturning.
Do not use the appliance if you suspect that some part may be broken, but deliver the appliance
directly for servicing.
Before raising to the upright position, ensure that the safety accessories are properly attached.
The appliance is installed with a speed limiter, which halves the maximum speed automatically when
the upright position raiser operation is used.
If you suspect that the limiter is not operating properly, do not use the Stand Support Sysytem, but
contact service.
When inclining the back backwards in the sitting position or lowering to the lying position, take care
that the upright position raiser appliance does not create pressure on the battery compartment. This
can cause the seat’s spindle motor or battery compartment to be damaged.
When using the Stand Support System, ensure that the foot support can move freely.
In a case that the foot support catches on the floor, an obstacle or an axis, stop operations and
adjust the various sections of the seat until the foot support is freed.
The foot support is generally released by adjusting the seat downwards or by adjusting the centre of
gravity backwards. An obstruction to the foot support may result in breakage of the spindle motor
used in the foot support adjustment.
Do not push the wheelchair. Use the drawstrings for transferring the wheelchair.
