R-NET
www.chasswheel.com
rev. 1
2014-05-08
13
ON/OFF- button
With the ON/OFF button, the driving controller can be switched on and off. Do
not use this switch to stop the wheelchair, except in an emergency.
Horn button
A sound signal sounds when the push button is pressed.
Speed buttons, Decrease/Increase
The maximum speed of the wheelchair can be increased by pressing the right
push button and decreased by using the left push button. The choice of
maximum speed is seen on the display whilst choosing, provided it is
programmed to be displayed. The maximum speed is the lowest when there is
only one darkened column on the display and the greatest when all the
columns on the display are darkened. When the joystick is moved forwards or
backwards, the driving controller transfers to driving mode and applies the
selected maximum speed. The maximum speed can also be adjusted while
driving.
MODE button
With the MODE button you can navigate the adjustment menu. The available
menus depend on the programming and the available operations of connected
optional equipment.
Profile button
The desired user profile can be chosen with the profile button. The available
profiles depend on the driving controller’s programming and its equipment. The
driving controller has pre-programmed profiles for indoor and outdoor driving.
The maximum speed for the indoor driving profile has been adjusted lower
than the speed in the outdoor driving profile.
Left turn indicator switch
By pushing the button, the wheelchair's left turn indicator lights are switched
on. The indicator lights are switched off by pressing the push button again.
When the indicator lights are on, the LED next to the push button will flash.
Right turn indicator switch
By pushing the button, the wheelchairs right turn indicator lights are switched
on. The indicator lights are switched off by pressing the push button again.
When the indicator lights are on, the LED next to the push button will flash.
Hazard warning switch
