R-NET
www.chasswheel.com
rev. 1
2014-05-08
44
2
EQUIPMENT AND THEIR USE
SAFETY BELT USE
The Stand Support System is equipped with a 4 point safety belt. The use of this is always
recommended whilst sitting in the wheelchair and must absolutely be used whilst using the Stand
Support System.
The safety belt must always be adjusted as suitable for the user.
KNEE SUPPORT USE
Included in the Stand Support System is a knee support, which is to always be used during the
operation of the Stand Support System.
The knee support is attached by connecting the triangular hooks that are at the end of the knee
support strap, to notches that are located on the front corners of the chair. Ensure that the hooks
are attached behind the slide preventer. The knee support is adjusted by a sliding adjustment band.
The adjustment band has velcro fastening. The knee support is adjusted correctly when it is snapped
underneath the kneecap. A loosely attached knee support does not give enough support whilst in the
erect position.
SEAT OPERATION ADJUSTMENT
The wheelchair seat is adjusted by pressing the MODE-button, whereupon the picture of the
adjustment appears on the screen. The seat part, which is seen darkened in the picture, is at that
moment adjusting. Adjustment happens by moving the guidance stick forwards and backwards.
Choosing the different parts of the seat occurs by moving the guidance stick to the right and left
sides by quick movements. By pressing the MODE button again, you can get back to the drive
situation.
FOOT SUPPORT ADJUSTMENT
The angle of the foot support is adjusted by selecting the foot support
adjustment from the MODE selection of the drive control. The
operational state is chosen when the foot support on the display is
visibly darkened. The foot support is adjusted by moving the guidance
stick forwards and backwards.
