MP1X20A Technical Reference
Chapter 2 - Operation
Chassis Plans
14
2.5 Connecting an External Monitor
An external monitor or projector can be hooked up via the side panel VGA (15pin) port while the system
is off. The Display/Projector will provide the cable to be inserted into this port. When connected, the
display should appear if the machine is powered on. The signal is standard with the internal viewing
resolution and the default setting is simultaneous display on both MP1X20A’s LCD and CRT. To
change the output mode (Simultaneous/LCD only/CRT only), please refer to your VGA setting.
2.6 Audio
The system audio does not require the user to install a sound
card but, instead, uses the motherboard on-board audio. The
built-in internal amplified speakers provide a phono stereo plug
that will fit into the output port of the motherboard.
Motherboard
Audio Area
