MP1X20A Technical Reference
Chapter 2 - Operation
Chassis Plans
10
LED Status Indicators
The front panel provides two LED indicators. The green LED indicates power on. The red LED
indicates hard disk drive access.
Display
Integrated TFT Active Matrix LCD provides UXGA 1.6M color display with resolution of 1600*1200.
Brightness is 300nits with an 800:1 contrast ratio and 5mS response. The LCD is provided with a
protective glass overlay with an anti-glare coating. A standard OSD allows fine tuning the display
parameters. Controls are located on the left side of the chassis.
Speaker
Two speakers are provided to allow media audio play back without having to use external speakers.
The speaker amplifier has a volume control on the left side for different environmental usage.
Rubber Corner Bumpers
The MP1X20 is provided with rubber bumpers for each corner to help protect the system from the
bumps and hits expected for a portable device such as this.
Power Switch
The power switch to turn on the computer is located on the right side of the front panel. This is a
standard momentary push button connected to the motherboard to take advantage of the ATX power
control standards.
Fans
Two 120mm and two 80mm fans, located inside & rear side of the chassis, provide sufficient cooling for
virtually any system configuration and environment. Other fan options are available for more flow or
quieter operation. Optional fan controls and alarms are available.
Filters
Filters located on both sides of the MP1X20A help block out dust and dirt from entering the system.
Expansion Slots
Seven slots for the add-in cards are all externally accessible on the left side of the system.
Handle
A large handle is provided on top for convenient transportation of the system with comfort and ease.
Keyboard Release Buttons
These buttons, located on each side, when pushed will release the locking mechanism to detach the
keyboard from the main MP1X20A chassis.
Additional VGA Input Ports
There are three different VGA ports which allow various VGA input. These are mounted on the left
side.
