Chassis Plans CPX2-173, Техническое описание, Страница: 52 / 54

Chassis Plans CPX2-173 Technical Reference Appendix D – Ethernet Network Connection
Page 46
Step 1
: Connect to the router and enter into its configuration page.
Step 2 : Locate the internal IP address of the CPX2-173. (e.g. 192.168.1.2)
Image D-4 – IP Address Locator
Step 3 : Assign the internal IP of the CPX2-173 to DMZ function and enable it
.
Image D-5 – IP Address Setting and Enable
In the above example, we can just type http://148.xxx.27.15 to enter web server of the CPX2-173.
Connect to multiple CPX2-173
If more than one CPX2-173 are installed at the same location but only has a single IP address to internet, then a
router with the NAT, Port forward and firewall function to map different service ports to individual CPX2-
173displays is required.
For example:
Table D-2 – Remote Control
To setup NAT and Port forward function on your router, you may refer to the following procedure for your
reference. (Different router will has its different setup method; please refer to the user manual of your router.)
Step 1 : Connect to the router and enter into its configuration page.