
Chassis Plans CPX2-173 Technical Reference
Chapter 4 - Installation
Page 17
Connecting the Display
The CPX2-173 provide for two controllers with rear panel details provided below.
Standard Controller Rear Panel Connections
The Standard Controller provides for DVI and VGA inputs. In
addition, the rear of the display provides for Keyboard and
Pointing Device outputs plus a Circular Mil connector for power
connection. If you have purchased a KVM option, then the
KVM control cable connector will be present. The sealed
keyboard with built-in pointing device offers universal output
providing USB and PS/2 outputs for the keyboard and ‘mouse’
devices.
The Standard Controller offers the following features:
Inputs:
Analog RGB: 60Hz at WUXGA, UXGA
75Hz at SXGA, WXGA, XGA, SVGA, VGA
With auto detect of Digital Separate Sync,
Sync-On-Green & Composite Sync. Auto detects VGA-WUXGA, interlaced & non-interlaced
DVI-D/HDMI: 60Hz at WUXGA
75Hz at SXGA, WXGA, XGA, SVGA, VGAImage Scaling:
Up / down scaling to fit input to
native panel resolution of 1280x1024.
Video:
NTSC /PAL/SECAM (Interlaced), Composite Video, S-video, SD Component (YCbCr),
HD Component (YPbPr)
Image Control: Brightness, Contrast, Saturation, Hue, Frequency, Phase, Color temperature, Image
position, Hue, Gamma.
Other Features: Auto picture setup, Auto RGB calibration, Auto source seek, OSD timeout, OSD position,
Input source select, OSD menu lock, Direct key for brightness level adjustment.
Photo 4 – Standard Controller Rear Panel I/O
Legend Function
Connector
VGA aRGB
Input
HD15 Female
Display Port Display Port Input
Display Port
HDMI HDMI
Input
HDMI
SDI Input
HD/SDI Input
BNC
Reclocked SDI Output
HD/SDI Reclocked Output
BNC
RS232 Control Port
RS232 Remote Control
DB9 Female
Touch Screen
Touch Screen Output USB
USBFTV22G (Optional)
12VDC Power
Input Power, 12VDC +/-5%
Circular Mil N/S 3102A-10SL-3P
Circuit Breaker
Power Interruption
Push to reset
Table 7 - Rear Panel Connections – Standard Controller
Содержание CPX2-173
