Chassis Plans CPX2-173, Техническое описание, Страница: 44 / 54

Chassis Plans CPX2-173 Technical Reference Appendix A – Display Serial Control Programming
Page 38
Table 12 - Standard Controller Other Control
Function Command Description Acknowledge (if enabled)
Select RS-232
acknowledge 0xc1, “0” | “1” | “2” |
“3” Disable/enable command
acknowledge. “0” – acknowledge disabled.
“1” – acknowledge enabled.
“2” – serial command disabled.
“3” – serial command enabled.
Auto-setup 0xc3 Start auto-setup of current
vmode. “0” – fail.
“1” – successful.
Command
availability 0xc4, n Check whether a command is
available. “0” – not available.
“1” – available.
Auto-calibration 0xc5 Start auto-calibration of gain
of the RGB amplifier. “0” – fail.
“1” – successful.
Freeze frame* 0xc6, “0” | “1” Unfreeze / freeze frame “0” – unfreeze.
“1” – freeze.
Soft Power On/Off* 0xc8,
“0” | “1” |
“?”
Soft power
off/on
query “0” – Turn off the LCD power and
backlight. Turn off memory
controller, Power down DVI
Power down ADC, Power
down Fclk PLL
“1” – Turn on the unit
Query video input
status* 0xc9 Query the status of the primary
& pip status “nn,nn” = input status
“nn,xx” digit = primary status:
“0”,”0” : invalid
“A”,”1” ARGB
“B”,”1” Composite
“B”,”2” Composite 2
“C”,”1” S-video
“C”,”2” S-video 2
“D”,”1” Component
“D”,”2” Component 2
“E”,”1” HDSDI
“E”,”2” HDSDI 2
“F”,”1” DVI
“H” “1” HDMI
“xx,nn”= PIP input status:
“0”,”0”: invalid
“A”,”1” ARGB “B”,”1”
Composite “B”,”2”
Composite 2 “C”,”1”
S-video “C”,”2” S-
video 2 “D”,”1”
Component “D”,”2”
Component 2 “E”,”1”
HDSDI
“E”,”2” HDSDI 2
“F”,”1” DVI
“H” “1” HDMI