Chassis Plans 17" SXGA LCD, Техническое описание

Страница: 43 / 62

Chassis Plans CCXR-17 Technical Reference Chapter 8 – KVM Programming
Page 41
Disable Port Switching Keys
To disable the Port Switching Keys ( [SCROLL LOCK][SCROLL LOCK] or [CTRL][CRTL] ) do the following:
1. Invoke HSM (see page 38).
2. Press
[X][ENTER] .
This is a toggle. To enable Port Switching, repeat steps 1 and 2.
Firmware Upgrade Mode
To set the KVM to Firware Upgrade Mode, do the following:
1. Invoke HSM (see page 38)
2. Key in “upgrade’ (no quote marks) on the keyboard.
3. Press
[ENTER] .
Note :
1. To exit Firmware Upgrade mode, you must power off the switch.
Restore Default Settings
To reset the KVM to its default hotkey settings, do the following:
1. Invoke HSM (see page 38)
2. Press
[R][ENTER]
See
Hotkey Default Settings
.
Video DynaSync
To invoke Video DynaSync, exclusive technology that eliminates boot-up display problems and optimizes
resolution when switching between ports, do the following:
1. Invoke HSM (see page 38)
2. Press
[D]
Mouse Port Switching
To enable/disable the Mouse Port Switching function, do the following:
1. Invoke HSM (see page 38)
2. Press
[W]
Notes :
1. This procedure is a toggle.
2. The default setting is disabled.
3. This feature is only supported when mouse emulation is enabled.
Mouse Emulation Control
To enable/disable Mouse Emulation, do the following:
1. Invoke HSM (see page 38)
2. Press
[M]