Chassis Plans 17" SXGA LCD, Техническое описание

Страница: 32 / 62

Chassis Plans CCXR-17 Technical Reference Chapter 6 - Installation
Page 30
Connecting the Display
The CCXR-17 provides for a single controller option with rear panel details provided below.
LCD Controller Rear Panel Connections
The LCD controller provides for DVI and VGA inputs. In addition, the
rear of the display provides for Keyboard and Pointing Device
outputs plus a Circular Mil connector for power connection. If you
have purchased a KVM option, then the KVM control cable connector
will be present. The sealed keyboard with built-in pointing device
offers universal output providing USB and PS/2 outputs for the
keyboard and ‘mouse’ devices.
The LCD controller offers the following features:
Inputs:
Analog RGB: 60Hz at SXGA, WXGA, XGA, SVGA, VGA With auto detect of Digital Separate Sync, Sync-
On-Green & Composite Sync. Auto detects VGA ~SXGA interlaced & noninterlaced.
DVI-D: 60Hz at SXGA, WXGA, XGA, SVGA, VGA
Image Scaling: Up / down scaling to fit input to native panel resolution of 1280x1024.
Image Control: Brightness, Contrast, Saturation, Hue, Frequency, Phase, Color temperature, Image position,
Hue, Gamma.
Other Features: Auto picture setup, Auto RGB calibration, Auto source seek, OSD timeout, OSD position,
Input source select, OSD menu lock, Direct key for brightness level adjustment.
Photo 10 – LCD Controller Rear Panel I/O w/ KVM
Table 8, following, details the connectors for the CCXR-17 with KVM installed. For installations without the KVM,
disregard the second part of the table and connect the computer signals utilizing the included cables as
indicated.