Chassis Plans 17" SXGA LCD, Техническое описание

Страница: 31 / 62

Chassis Plans CCXR-17 Technical Reference Chapter 6 - Installation
Page 29
Chapter 6 - Installation
Rack Installation
To mount the CCXR-17 in a rack, it is first important you identify the correct holes to mount to. Please see the
following illustration. Note that a ‘U’ starts between the holes that are ½” apart. One very common problem is
trying to install into the wrong holes.
Because there are multiple styles of racks, it is not possible to provide detailed instructions on mounting the
equipment. However, there are general instructions at
http://www.chassis-plans.com/PDF/Rack_Slide_Use.pdf
for rack installation which should help.
Figure 7 - Rack Mounting Hole Spacing
Chassis Plans offer free Rack Rulers to assist in installing equipment into racks. You should have received one
with your order. To request more, fill out the short form at
http://www.chassis-plans.com/form_rack_ruler.html
and we’ll send you as many as you want. These are invaluable for installing systems into racks.