DuraShield Installation Manual
Motorized – Inside Standoff
Chase Doors Inc.
800-543-4455
3/12
DuraShield Installation Manual RB0375
Page
12
10.
Installation of Optional Roll Cover -
Center the roll cover over the roll. Fasten securely to the wall.
Splice Plate Roll Cover Bracket
If your Roll Cover comes in multiple pieces a Splice Plate is provided, as shown, to connect the
Roll Cover sections together. On wider Roll Covers, support brackets are provided as shown.
The Roll Cover Brackets should be mounted to the wall to support the weight of the Roll Cover.
They would be installed prior to installing the Roll as in section 3. They should be mounted so
that the Roll Cover will be level when installed. They should be mounted near each end of the
Roll Cover location and then spaced at approximately 24” apart. The Roll Cover is then lifted
onto the installed support brackets and secured to the wall as normal. The Roll Cover does not
attach to the support brackets, just to the wall. Any openings in the end caps, for shafts etc., are
to be done by the installer on site.
