7
Product Manual - Nomad 830G MP
General
The new Nomad 830 MP Storage and Delivery System is
another extension of the Perma-Cyl
®
MicroBulk Storage
System's innovative design and technology. The Nomad
830 MP maintains all the features of the existing Perma-
Cyl system with the improved benefit of being mobile. The
horizontal orientation and low profile of the Nomad 830
MP as well as the design of the trailer base allows for easy,
versatile handling and mobility.
This product was designed for the volume MicroBulk user
in mind. Several features include fast fill capability (top
and bottom) and extended hold time. The fast fill feature is
accomplished with two filling valves, a top and a bottom
fill valve which allows for the tank to be filled efficiently
without any venting or loss of product (zero losses) under
normal conditions
The cylinder also uses the most advanced pressure
building and vaporization technology today. The external
PB vaporizer is mounted under the tank for optimum
performance. The single flat fin design allows it to shed
ice easily and maintain pressure during high gas use rate
situations
The external process vaporizer is a stand alone vaporizer
mounted onto the trailer. For optimum performance, the
trailer should be parked with this vaporizer in as much sun
exposure as possible
Installation Common Codes and
Standards
The installer will need to find out what local city ordinances
and which rules they are mandated to follow. One of the
following standards may apply:
• Uniform Fire Code (UFC)
• Compressed Gas Association (CGA)
• National Fire Protection Association (NFPA)
Note:
Regulations vary in every part of the
country. Always consult local codes!
Initial Inspection
Upon receipt of a Nomad 830 MP, inspect for the following:
•
Any shipping damage to the cylinder, trailer or vaporizer,
including dents, scrapes, cuts, and broken or bent
plumbing components. Report damage to the shipping
company before accepting delivery
•
Check relief valves and burst discs for dirt or damage.
•
Warranty card, operator instructions sheet and user
manual
•
Check to ensure that there is positive pressure on the
inner vesser, normally about 20-25 psig.
The Nomad 830 MP is shipped with NF purity nitrogen gas.
Purging is necessary prior to filling.
Transport
The vessel is built to CGA-341 (49 CFR 173.320)
which
requires the vessel pressure to be kept below 25.4 psig during
transit. The relief valves on the Nomad 830 MP meet the
ASME and CGA requirements Maintaining transit pressure
is accomplished through the road relief circuit/regulator.
Using the Trailer
The customer should attach all required tags, product
labels, etc. before using the trailer. Both the pintle style and
gooseneck trailers come with a Felling XPress trailer owner's
manual. Always consult this publication before using the
product. Most trailers are also equipped with a label that
details the connection procedure (see Figure 1):
Figure 1 - Label detailing connection procedure
Introduction/Operation
