background image

Chart Environmental Chambers 

 

Replacement Parts 

REPLACEMENT PARTS 

 
If any parts are required, please call 1-888-877-3093 for pricing and availability.  The 
following information provides Chart Industries, Inc. part numbers to assist in finding the 
correct part. 
 
 

❏ 

Liquid Nitrogen Solenoid Valve 

 

The following table lists various items that may need to be replaced over time with 
respect to the liquid nitrogen control valves. 

Table 4 - Liquid Nitrogen Cooling Valve Parts 

Item 

Chart Industries, Inc. P/N 

Cooling solenoid valve 

11626691 

Cooling solenoid valve for HP model 

11744195 

 
 

❏ 

 Temperature Sensors 

 

Thermocouples 

This type T thermocouple is a rugged and shielded sensor designed to withstand the 
entire temperature range of the chamber.  The shielding helps ensure reliable input 
signals to the temperature controller.  Chart sells this wire by the foot.  The thermocouple 
wires run from the inside of the chamber, through the plenum and into the control box via 
conduit.  Thermocouples are used for the chamber temperature control and the air 
controller. 

Table 5 - Replacement Thermocouple 

Item 

Type 

Chart Industries, Inc. P/N 

Thermocouple Wire 

11082890 

 

 

  Door Guard Switch 

The chamber door is monitored by a guard switch that keeps the chamber from running if 
the chamber door is opened.  This serves as a safety function of the chamber.  The 
following table identifies the part number for this switch. 
 

Table 6 - Door Guard Switch 

Item 

CHART INDUSTRIES, Inc. P/N 

Door Guard Switch 

11354921 

 

 

 

16

Содержание 11744195























Отзывы: